PlainRecalls
CPSC Moderate Active

Safety Alert: Robert Bosch Tool Corp. Abrasive Cut-Off Wheels Lack Safety Warning Label

Reported: June 9, 2006 Initiated: June 9, 2006 #06184

Product Description

The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2" 1/8" 28027 7"-7-1/4" 1/8" 28028 8" 1/8" 28030 10" 1/8" 28032 12" 1/8" 28033 14" 1/8"

Reason for Recall

The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. "! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."

Remedy

Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.

Frequently Asked Questions

What product was recalled?
The wheels have a black, abrasive exterior; a red circular label on the interior; and are used to clean, slot, nick and cut metal. The wheels were sold under the "Vermont American" brand name had the following catalog numbers, diameters and blade thickness: Item # Diameter Blade Thickness 28026 6-1/2" 1/8" 28027 7"-7-1/4" 1/8" 28028 8" 1/8" 28030 10" 1/8" 28032 12" 1/8" 28033 14" 1/8". Recalled by Robert Bosch Tool Corp., Mt. Prospect, Ill.. Units affected: About 400,000.
Why was this product recalled?
The Abrasive Cut-Off Wheel packages are not properly labeled with precautionary information on proper use and operation. The failure of a user to follow the instructions below could result in injury. "! WARNING Read, understand and comply with tool manual before use. Follow OSHA and ANSI B7.1 standards. Use eye, face, dust and ear protection. Wear body apron and gloves. Speed rating of wheel must be greater than tool speed. Do not grind without guard adjusted for maximum operator protection. Mount wheel with the tool flanges provided. Run-in for one minute before application. Do not jam, twist or pinch wheel in work piece or apply excessive side pressure to the wheel. RECOIL may occur if wheel is jammed. Do not use near flammable materials or gases; fire or explosion may result. Do not expose to water, condensation or freezing. Discard wheel if dropped, cracked or chipped."
What should consumers do?
Consumers with abrasive cut-off wheels that are missing the safety instructions should contact Vermont American Customer Service to obtain safety warning information.
Which agency issued this recall?
This recall was issued by the CPSC on June 9, 2006. Severity: Moderate. Recall number: 06184.