PlainRecalls
NHTSA Critical Active

HONDA 2002-2005: ELECTRICAL SYSTEM:WIRING

Reported: August 15, 2007 Initiated: August 15, 2007 #07V359000

Product Description

ON CERTAIN MOTORCYCLES, THE FRONT FAIRING SUB-HARNESS (SECTION OF THE WIRING HARNESS) TRANSFERS THE ELECTRICAL GROUNDING LOAD OF THE HEADLIGHTS, FRONT TURN SIGNALS, INSTRUMENT PANEL, AND VARIOUS RELAYS TO THE MAIN WIRING HARNESS VIA AN 18-PIN CONNECTOR. UNDER CERTAIN CONDITIONS, THE GROUND WIRE TERMINALS INSIDE THE CONNECTOR CAN OVERHEAT, RESULTING IN MELTING OF THE CONNECTOR AND A LOSS OF POWER TO VARIOUS CIRCUITS.

Reason for Recall

ON CERTAIN MOTORCYCLES, THE FRONT FAIRING SUB-HARNESS (SECTION OF THE WIRING HARNESS) TRANSFERS THE ELECTRICAL GROUNDING LOAD OF THE HEADLIGHTS, FRONT TURN SIGNALS, INSTRUMENT PANEL, AND VARIOUS RELAYS TO THE MAIN WIRING HARNESS VIA AN 18-PIN CONNECTOR. UNDER CERTAIN CONDITIONS, THE GROUND WIRE TERMINALS INSIDE THE CONNECTOR CAN OVERHEAT, RESULTING IN MELTING OF THE CONNECTOR AND A LOSS OF POWER TO VARIOUS CIRCUITS.

Hazard

AS A RESULT, A LOSS OF CRITICAL LIGHTING OR ENGINE POWER COULD OCCUR WITHOUT WARNING, WHICH COULD CAUSE A CRASH.

Remedy

DEALERS WILL INSTALL A RE-DESIGNED SUB-HARNESS. IF DAMAGE IS FOUND, THE MAIN WIRING HARNESS WILL ALSO BE REPLACED FREE OF CHARGE. AN INTERIM LETTER WAS MAILED TO OWNERS ON SEPTEMBER 26, 2007. OWNERS WERE RE-NOTIFIED ON NOVEMBER 10, 2007, TO TAKE THEIR MOTORCYCLES TO DEALERS TO HAVE THE PARTS INSTALLED. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.

Details

Recalling Firm
HONDA
Distribution
United States
Official Source
https://www.nhtsa.gov/recalls?nhtsaId=07V359000

Frequently Asked Questions

What product was recalled? ▼
ON CERTAIN MOTORCYCLES, THE FRONT FAIRING SUB-HARNESS (SECTION OF THE WIRING HARNESS) TRANSFERS THE ELECTRICAL GROUNDING LOAD OF THE HEADLIGHTS, FRONT TURN SIGNALS, INSTRUMENT PANEL, AND VARIOUS RELAYS TO THE MAIN WIRING HARNESS VIA AN 18-PIN CONNECTOR. UNDER CERTAIN CONDITIONS, THE GROUND WIRE TERMINALS INSIDE THE CONNECTOR CAN OVERHEAT, RESULTING IN MELTING OF THE CONNECTOR AND A LOSS OF POWER TO VARIOUS CIRCUITS.. Recalled by HONDA.
Why was this product recalled? ▼
ON CERTAIN MOTORCYCLES, THE FRONT FAIRING SUB-HARNESS (SECTION OF THE WIRING HARNESS) TRANSFERS THE ELECTRICAL GROUNDING LOAD OF THE HEADLIGHTS, FRONT TURN SIGNALS, INSTRUMENT PANEL, AND VARIOUS RELAYS TO THE MAIN WIRING HARNESS VIA AN 18-PIN CONNECTOR. UNDER CERTAIN CONDITIONS, THE GROUND WIRE TERMINALS INSIDE THE CONNECTOR CAN OVERHEAT, RESULTING IN MELTING OF THE CONNECTOR AND A LOSS OF POWER TO VARIOUS CIRCUITS.
What should consumers do? ▼
DEALERS WILL INSTALL A RE-DESIGNED SUB-HARNESS. IF DAMAGE IS FOUND, THE MAIN WIRING HARNESS WILL ALSO BE REPLACED FREE OF CHARGE. AN INTERIM LETTER WAS MAILED TO OWNERS ON SEPTEMBER 26, 2007. OWNERS WERE RE-NOTIFIED ON NOVEMBER 10, 2007, TO TAKE THEIR MOTORCYCLES TO DEALERS TO HAVE THE PARTS INSTALLED. OWNERS MAY CONTACT HONDA AT 1-866-784-1870.
Which agency issued this recall? ▼
This recall was issued by the NHTSA on August 15, 2007. Severity: Critical. Recall number: 07V359000.

Related Recalls

NHTSA Critical

LEXUS 2025: POWER TRAIN:AUTOMATIC TRANSMISSION

LEXUS · 2026-02-18
NHTSA Critical

CADILLAC,CHEVROLET,GMC 2022: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE

CADILLAC,CHEVROLET,GMC · 2026-02-13
NHTSA Critical

CHEVROLET,GMC 2020-2022: POWER TRAIN:AUTOMATIC TRANSMISSION:CONTROL MODULE:SOFTWARE

CHEVROLET,GMC · 2026-02-12
NHTSA Critical

CADILLAC 2024: BACK OVER PREVENTION:SOFTWARE

CADILLAC · 2026-02-12
NHTSA Critical

NISSAN 2024-2025: FUEL SYSTEM, GASOLINE:FUEL INJECTION SYSTEM:THROTTLEBODY/MANIFOLD

NISSAN · 2026-02-12

Explore Related Data

Vehicle Safety → Drug Information →