PlainRecalls
CPSC Moderate Active

Visonic Recalls Amber Personal Emergency Response System Kits Due to Remote Pendant Battery Signal Failure

Reported: September 11, 2013 Initiated: September 11, 2013 #13280

Product Description

The recalled Visonic Amber Personal Emergency Response System (PERS) kit enables a user to push a button on a pendant to signal a request for assistance. An Amber kit consists of one wireless pendant worn by the user, one Amber brand base station, generally connected to a phone line, a power supply and backup battery. Base stations are white, rectangular and measure about 9 inches wide by 7 inches deep by 2 inches high with emergency, call and check buttons. The emergency button is red on the Classic model and grey on the SelectX model. Recalled Classic models have catalog number 0-7425 and serial numbers 0408044281 through 4410052723. The first four digits of the serial number are manufacture dates from January 2008 through August 2010 in WWYY format. Recalled SelectX models have catalog number 0-100729 and serial numbers 2308600299 through 3013079617 The first four digits represent manufacture dates June 2008 through July 2013 in WWYY format. The first two digits are week of manufacture and the second two numbers are the year of manufacture. For example serial number 2308 600299 indicates a manufacturing date of the 23rd week of 2008 or roughly June 2008. Each unit has an external label on the back of the base station, with the product name and serial number. Only Amber Classic or SelectX base stations that are placed in Common Area Mode by a professionally trained PERS system installer and are used without additional base stations, are included in the recall.

Reason for Recall

A single Amber Base station set to Common Area Mode will not detect a low battery or dead battery warning signal from the remote pendant that notifies the end user or system administrator to replace the pendant battery.

Remedy

Consumers should immediately contact their system installer or a Visonic alarm installation professional to determine if their Amber base station is set to Common Area Mode, and if so, to either reset their unit to another mode or make other system changes, such as adding an additional base station. Only a professionally-trained PERS system installer can identify and modify the particular mode configuration. Owners are also reminded to manually test their Amber PERS pendant regularly for low battery status.

Frequently Asked Questions

What product was recalled?
The recalled Visonic Amber Personal Emergency Response System (PERS) kit enables a user to push a button on a pendant to signal a request for assistance. An Amber kit consists of one wireless pendant worn by the user, one Amber brand base station, generally connected to a phone line, a power supply and backup battery. Base stations are white, rectangular and measure about 9 inches wide by 7 inches deep by 2 inches high with emergency, call and check buttons. The emergency button is red on the Classic model and grey on the SelectX model. Recalled Classic models have catalog number 0-7425 and serial numbers 0408044281 through 4410052723. The first four digits of the serial number are manufacture dates from January 2008 through August 2010 in WWYY format. Recalled SelectX models have catalog number 0-100729 and serial numbers 2308600299 through 3013079617 The first four digits represent manufacture dates June 2008 through July 2013 in WWYY format. The first two digits are week of manufacture and the second two numbers are the year of manufacture. For example serial number 2308 600299 indicates a manufacturing date of the 23rd week of 2008 or roughly June 2008. Each unit has an external label on the back of the base station, with the product name and serial number. Only Amber Classic or SelectX base stations that are placed in Common Area Mode by a professionally trained PERS system installer and are used without additional base stations, are included in the recall.. Recalled by Visonic Ltd., of Tel Aviv, Israel. Units affected: About 24,000.
Why was this product recalled?
A single Amber Base station set to Common Area Mode will not detect a low battery or dead battery warning signal from the remote pendant that notifies the end user or system administrator to replace the pendant battery.
What should consumers do?
Consumers should immediately contact their system installer or a Visonic alarm installation professional to determine if their Amber base station is set to Common Area Mode, and if so, to either reset their unit to another mode or make other system changes, such as adding an additional base station. Only a professionally-trained PERS system installer can identify and modify the particular mode configuration. Owners are also reminded to manually test their Amber PERS pendant regularly for low battery status.
Which agency issued this recall?
This recall was issued by the CPSC on September 11, 2013. Severity: Moderate. Recall number: 13280.